lspcmcia - Unix, Linux Command
NAME
pccardctl - PCMCIA card control utilitySYNOPSIS
pccardctl [-V] command [socket]DESCRIPTION
pccardctl is used to monitor and control the state of PCMCIA sockets. If a socket number is specified, the command will be applied to just one socket; otherwise, all sockets will be affected.If pccardctl is executed by root, all commands are available. If it is executed by an unpriviledged user, only the informational commands are accessible.
COMMANDS
| Tag | Description |
|---|---|
| status | |
| Display the current socket status flags. --not yet implemented | |
| config | |
| Display the socket configuration, including power settings, interrupt and I/O window settings, and configuration registers. --not yet implemented | |
| ident | |
| Display card identification information, including product identification strings, manufacturer ID codes, and function ID codes. Not yet implemented for cardbus cards. Use lspci instead. | |
| info | Much like the ident command, but its output is formatted as a series of Bourne-stype shell variable definitions for use in scripts. Not yet implemented for cardbus cards. |
| suspend | |
| Shut down and then disable power for a socket. | |
| resume | |
| Restore power to a socket, and re-configure for use. | |
| eject | |
| Notify all client drivers that this card will be ejected, then cut power to the socket. | |
| insert | |
| Notify all client drivers that this card has just been inserted. | |
OPTIONS
| Tag | Description |
|---|---|
| -V | Show version information and exit. |
AUTHOR
Daniel Ritz - [email protected]based upon the original cardctl man page by
David Hinds - [email protected]